WHEEL CASTINGS FOR MODEL RAILWAYS
GAUGE 0
Complete sets of wheel castings at 7 mm/ft or at
1:45
Individual castings, prices and stock
Castings listed by internal diameter
GAUGE 1
Complete sets of wheel castings.
Individual castings, prices and stock
Castings listed by internal diameter
Gauge One standards . G1MRA diagrams
G1MRA 'PROJECT' and
'DEE'
GAUGE 3, 2½ inch GAUGE
Complete sets of wheel castings
Individual castings, prices and stock
Castings listed by internal diameter
3½ inch GAUGE, 1:16 scale
Complete sets of wheel castings
Individual castings, prices and stock
5 inch GAUGE, 1:11.29 scale
Complete sets of wheel castings
Individual castings, prices and stock
7¼ inch GAUGE, 1:8 scale
Complete sets of wheel castings
Individual castings, prices and stock
CAPE and NARROW GAUGES
Complete sets of wheel castings
Individual castings, prices and stock
Internal diameters of 1:24 scale castings
Misc. parts axles, bearings etc.
These castings are NOT expected to be strong enough to be gripped from the centre only when turning
the tread. Castings should be gripped by their shoulders, or in the later stages between discs each side of the tyre.
See Turning suggestions.
CUTTING TOOLS: lathe tools with replaceable tips having a small tip radius are ideal for most metals - but on cast iron they can produce a hard shiny
surface and crumbling at the edges. I have had no problems with sharp pointed (roughing) carbide tipped tools.
On iPhones running on later iOS versions including iOS 15 with Safari: Settings> Safari > Advanced (at bottom of page) > Website data > Remove website data (at bottom of page).
26 June 2025